皇冠|比分网址

          
          



                      Test ID Test name
                      C-120 Environmental Stress Cracking (ESCR)
                      D-010 Solid Density
                      D-015 Melt Density
                      D-016 Bulk Density
                      D-017 Drying for Moisture Sensitive Materials
                      D-018 Moisture Analysis
                      D-019 Water Absorption
                      D-020 PVT (Isothermal Heating)
                      D-021 PVT (Isobaric)
                      D-022 Volumetric Expansion Coefficient by PVT
                      D-023 High Rate PVT by Hybrid PVT/DSC
                      D-024 Solid State Compressibility (PVT)
                      D-026 High Pressure PVT
                      D-040 Volumetric Expansion Coefficient by DMA
                      G-000 Moldflow/C-MOLD Filling
                      G-001 Moldflow/C-MOLD Filling + Juncture Losses
                      G-002 Moldflow/C-MOLD Post-Filling
                      G-003 Moldflow/C-MOLD Post-Filling + Juncture Losses
                      G-006 Moldflow/C-MOLD Uncorrected Isotropic Shrinkage
                      G-007 Moldflow/C-MOLD Uncorrected Anisotropic Shrinkage
                      G-009 Moldflow/C-MOLD Mechanicals for Uncorrected Anisotropic Shrinkage
                      G-010 C-MOLD Filling/Cooling
                      G-011 C-MOLD Filling/Cooling + Juncture Loss (Bagley correction)
                      G-012 C-MOLD Post Filling for Amorphous Plastics
                      G-013 C-MOLD Post Filling + Juncture Loss for Amorphous Plastics
                      G-014 C-MOLD Anisotropic Shrinkage & Warpage (Amorphous Plastics)
                      G-015 C-MOLD Isotropic Shrinkage & Warpage (Amorphous Plastics)
                      G-017 C-MOLD Post Filling for Semi-Crystalline Plastics
                      G-018 C-MOLD Anisotropic Shrinkage for Semi-Crystalline Plastics
                      G-114 Moldflow CRIMS Shrinkage
                      G-115 Moldflow CRIMS Shrinkage + Juncture Losses
                      G-116 Moldflow MF/Stress Anisotropic
                      G-117 Moldflow MF/Stress Isotropic
                      G-120 Autodesk Helius PFA
                      G-150 Moldex3D Flow/Cool
                      G-152 Moldex3D Flow/Pack/Cool
                      G-154 Moldex3D Flow/Pack/Cool/Warp (Isotropic)
                      G-155 Moldex3D Flow/Pack/Cool/Warp (Anisotropic)
                      G-158 Moldex3D Isotropic Mechanical Properties
                      G-159 Moldex3D Anisotropic Mechanical Properties
                      G-170 DIGIMAT MX Elastic eX-E
                      G-171 DIGIMAT MX Elasto-Plastic (J2_EP)
                      G-171RE DIGIMAT J2_EP Reverse Engineering
                      G-172 DIGIMAT MX Druker Prager (DP)
                      G-172RE DIGIMAT DP Reverse Engineering
                      G-173 DIGIMAT MX Elasto-plastic with Damage (EP+D)
                      G-173RE DIGIMAT EP+D Reverse Engineering
                      G-174 DIGIMAT MX Crash (EVP)
                      G-174RE DIGIMAT EVP Reverse Engineering
                      G-175 DIGIMAT MX Creep (TEVP)
                      G-175RE DIGIMAT TEVP Reverse Engineering
                      G-176 DIGIMAT MX Warpage (Thermomechanic)
                      G-176RE DIGIMAT TE Reverse Engineering
                      G-178 DIGIMAT MX Crash (EVP) Multi-Direction Rate Dependent Model
                      G-190 Altair Multiscale Designer for Unidirectional (UD) Composites
                      G-210 I-DEAS Mold Fill/Cool
                      G-212 I-DEAS Packing
                      G-215 I-DEAS Isotropic Viscoelastic Shrink/Warp
                      G-216 I-DEAS Isotropic Shrink/Warp
                      G-220 VISI Flow Filling
                      G-222 VISI Flow Filling/Thermal
                      G-224 VISI Flow Shape
                      G-242 SIMPOE Thermoplastic Filling Analysis
                      G-244 SIMPOE Thermoplastic Filling Analysis with Warpage
                      G-250 Cadmould Filling
                      G-251 Cadmould Packing
                      G-260 SIGMASOFT Thermoplastic: Unfilled Amorphous Material
                      G-262 SIGMASOFT Thermoplastic: Filled Amorphous Material
                      G-264 SIGMASOFT Thermoplastic: Unfilled Semi-Crystalline Material
                      G-266 SIGMASOFT Thermoplastic: Filled Semi-Crystalline Material
                      G-268 SIGMASOFT Elastomer: Standard Filling + Curing
                      G-269 SIGMASOFT MIM
                      G-270 PlanetsX Flow / Pack / Cool (Thermoplastic Resin)
                      G-271 PlanetsX Flow / Pack / Cool / Warp (Thermoplastic Resin)
                      G-274 PlanetsX Flow / Pack/ Cool (Thermosetting Resin)
                      G-275 PlanetsX Flow / Pack/ Cool/ Warp (Thermosetting Resin)
                      G-310 POLYFLOW Extrusion (Viscous Isothermal)
                      G-312 POLYFLOW Extrusion (Viscous Non-Isothermal)
                      G-314 POLYFLOW Extrusion (Iso-Thermal Viscoelastic)
                      G-315 POLYFLOW Extrusion (Viscoelastic)
                      G-320 POLYFLOW Thermoforming (Isothermal)
                      G-321 POLYFLOW Thermoforming (Non-Isothermal)
                      G-330 POLYFLOW Blow Molding (Isothermal)
                      G-331 POLYFLOW Blow Molding (Non-Isothermal)
                      G-350 Polycad
                      G-360 VEL Basic
                      G-361 VEL Basic + Melt Thermal Properties
                      G-362 VEL Basic + Melt & Solid Thermal Properties
                      G-363 VEL Basic + Normal Stress & Elongational Viscosity
                      G-370 HyperXtrude
                      G-380 WinTXS Melt Only TestPak
                      G-382 WinTXS General TestPak
                      G-390 PELDOM Isothermal TestPak
                      G-392 PELDOM Non-Isothermal TestPak
                      G-393 PolyXtrue Extrusion TestPak
                      G-394 PolyXtrue Extrusion Economy TestPak
                      G-410 FIDAP CFD Isothermal
                      G-430 Universal TestPak-Elastic Plastic Model
                      G-432 Universal TestPak-Hyperelastic (Incompressible)
                      G-434 Universal TestPak-Hyperelastic (Compressible)
                      G-460 Universal TestPak-Rate Dependent Model
                      G-510 PAM-CRASH Strain Rate Dependent Foam
                      G-520 PAM-CRASH Strain Rate Dependent Isotropic Material
                      G-540 PAM-FORM Isothermal Forming
                      G-542 PAM-FORM Non-Isothermal
                      G-550 PAM-Comfort Cover (Static)
                      G-551 PAM-Comfort Padding (Static)
                      G-552 PAM-Comfort Foam (Static)
                      G-553 PAM-Comfort Foam (Dynamic)
                      G-600 RADIOSS Elastic Material Model (Law 1)
                      G-601 RADIOSS Johnson-Cook Quasi-Static Material Model (Law 2)
                      G-602 RADIOSS Tensile Rate Dependent Model (Laws: 2, 36, 44)
                      G-603 RADIOSS Quasi-Static Foam Material (Law 70)
                      G-604 RADIOSS Rate Dependent Foam Model (Law 70)
                      G-605 RADIOSS Rate Dependent Foam Model with Unloading (Law 70)
                      G-606 RADIOSS Hyperelastic Model (Law 42, 69)
                      G-607 RADIOSS Hyperelastic Model with Viscoelasticity (Law 42)
                      G-610 EXTRUD Extrusion (Non-Isothermal)
                      G-653 SolidWorks Nonlinear Elastic
                      G-654 SolidWorks Plasticity – von Mises
                      G-660 SolidWorks HyperElastic – Ogden and Mooney Rivlin
                      G-662 SolidWorks Viscoelastic (Creep)
                      G-680 Autodesk Inventor Isotropic Elastic Model
                      G-705 Abaqus Isotropic Elastic Model (*ELASTIC)
                      G-706 Abaqus Orthotropic Composite
                      G-708 Abaqus Metal Forming (*ELASTIC *CREEP, OPTION=POTENTIAL)
                      G-709 Abaqus Finite Elastic Plasticity (*HYPERELASTIC *PLASTIC)
                      G-711 Abaqus Elastic and Plastic model (*ELASTIC *PLASTIC)
                      G-712 Abaqus Rate Dependent Viscoplastic (*RATE DEPENDENT)
                      G-720 Abaqus Hyperelastic Incompressible (*HYPERELASTIC)
                      G-722 Abaqus Hyperelastic Compressible (*HYPERELASTIC)
                      G-723 Abaqus Hyperfoam (*HYPERFOAM)
                      G-724 Abaqus Crushable Foam (*ELASTIC *CRUSHABLE FOAM)
                      G-725 Abaqus Crushable Foam with Rate Dependency (*ELASTIC, *CRUSHABLE FOAM, OPTION=RATE DEPENDENT)
                      G-730 Abaqus Creep Model (*CREEP, LAW=TIME)
                      G-740 Abaqus Stress Relaxation (*VISCOELASTIC, TIME=RELAXATION)
                      G-742 Abaqus Viscoelastic Model (*VISCOELASTIC)
                      G-743 Abaqus Non-Linear NVH Model - Rubber and Foam
                      G-744 Abaqus Creep (*VISCOELASTIC, TIME=CREEP)
                      G-751 ANSYS Kinematic Hardening (BKIN, MKIN/KINH)
                      G-753 ANSYS Isotropic Hardening (BISO, MISO)
                      G-754 ANSYS non-linear kinematic hardening Chaboche model (CHABOCHE)
                      G-755 ANSYS Viscoelastic (TB, Prony or EVISC)
                      G-757 ANSYS Creep (CREEP)
                      G-759 ANSYS Ogden Foam
                      G-760 ANSYS Hyperelastic w/ compressibility (HYPER)
                      G-761 ANSYS Hyperelastic (HYPER)
                      G-762 ANSYS Multilinear Elastic (MELAS)
                      G-763 ANSYS Gasket (GASKET)
                      G-770 LS-DYNA High Speed 3 Point Flexural Rate Dependent Model (MAT_019 or MAT_024)
                      G-771 LS-DYNA High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024)
                      G-771V LS-DYNA Validated High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024)
                      G-772 LS-DYNA High Speed Foam Model (MAT_083 or MAT_163)
                      G-776 LS-DYNA GISSMO Failure Model
                      G-776I LS-DYNA MAT_024+GISSMO shell element failure model for metals
                      G-778 LS-DYNA SAMP-1 Semi-Analytical Model for Plastic (MAT_187)
                      G-778I LS-DYNA SAMP+GISSMO shell element failure model for ductile plastic (MAT_187+GISSMO)
                      G-780 LS-DYNA Hyperelastic (MAT_027)
                      G-782 LS-DYNA Hyperviscoelastic Rubber (MAT_077)
                      G-784 LS-DYNA Simplified Rubber with Rate Dependency (MAT_181)
                      G-790 LS-DYNA Forming (Barlat 3-parameter model: MAT_036)
                      G-791 LS-DYNA Transversely Anisotropic Elastic Plastic (MAT_037)
                      G-792 LS-DYNA Isotropic Elastic (MAT_001)
                      G-793 LS-DYNA Plastic Kinematic (MAT_003)
                      G-794 LS-DYNA Laminated Composite Fabric (MAT_054)
                      G-801 MSC.NASTRAN Linear Elastic (MAT1)
                      G-805 MSC.NASTRAN Orthotropic Elastic (MAT8)
                      G-807 MSC.NASTRAN Plasticity Model (MATS1)
                      G-808 MSC.NASTRAN Temp. Dependent Linear Elastic (MATT1)
                      G-810 MSC.NASTRAN Hyperelastic Incompressible Model (MATHP)
                      G-811 MSC.NASTRAN Hyperelastic Compressible Model (MATHP)
                      G-814 MSC.NASTRAN Creep Model (CREEP)
                      G-860 MSC.Dytran Isotropic Elastic (DMATEL)
                      G-869 MSC.Dytran Piecewise Linear Plasticity (Quasi-Static Properties) (DYMAT24)
                      G-870 MSC.Dytran Rate Dependent Flexural Piecewise Linear Plasticity (DYMAT24)
                      G-871 MSC.Dytran Rate Dependent Tensile Piecewise Linear Plasticity
                      G-901 MSC.MARC Linear Isotropic
                      G-905 MSC.MARC Orthotropic Linear Elastic
                      G-907 MSC.MARC Strain Rate Dependent Non-Linear
                      G-908 MSC.MARC Work Hardening Model
                      G-909 MSC.MARC Mechanical Temperature
                      G-910 MSC.MARC Creep/Stress Relaxation Model
                      G-912 MSC.MARC Isotropic Viscoelastic
                      G-914 MSC.MARC Hyperelastic Model
                      G-925 NX Nastran Linear Elastic (MAT1)
                      G-929 NX Nastran Isotropic Heat Transfer (MAT4)
                      G-932 NX Nastran Orthotropic (MAT8)
                      G-936 NX Nastran Gasket Material (MATG)
                      G-937 NX Nastran Hyperelastic (MATHE)
                      G-938 NX Nastran Hyperelastic Incompressible (MATHP)
                      G-939 NX Nastran Hyperelastic (Compressible) (MATHP)
                      G-940 NX Nastran Material Stress Dependence (MATS1)
                      G-941 NX Nastran Isotropic Temperature Dependence (MATT1)
                      G-942 NX Nastran Isotropic Creep (CREEP)
                      G-950 T-SIM Basic
                      G-951 T-SIM Basic + Thermal Properties
                      G-980 B-SIM Basic
                      G-981 B-SIM Basic + Thermal Properties
                      M-010 Anisotropic Tensile Moduli
                      M-011 Tensile Modulus
                      M-012 Compressive Modulus
                      M-013 Orthotropic In-Plane Shear Modulus (Includes M-010, M-101)
                      M-014 Bulk Modulus (Up To 8 Temperatures)
                      M-015 Flexural Modulus and Strength
                      M-016 Tensile Modulus, Strength and Elongation
                      M-017 In-Plane Shear Modulus (Plate Twist Method)
                      M-030 Tensile Strength
                      M-031 Compressive Strength
                      M-032 Tear Strength of Rubber
                      M-033 Blocking Strength
                      M-034 Short Beam Shear Strength
                      M-035 Plastic Point in Tension
                      M-036 Plastic Point in Flexure
                      M-037 Plastic Point In Compression
                      M-038 Shear Strength
                      M-040 Bearing Strength
                      M-041 Lap Shear Strength
                      M-043 Peel Test
                      M-050 Open Hole Tension (OHT)
                      M-051 Open Hole Compression (OHC)
                      M-052 Fracture Toughness and Strain Energy Release Rate
                      M-052M Fracture Toughness of Metals (K1c)
                      M-053M Crack Propagation of Metallic Materials
                      M-060 Coefficient of Friction (Static and Dynamic)
                      M-067 Abrasion Test, Filament & Wire
                      M-068 Taber Abrasion Test
                      M-101 Poisson’s Ratio and Tensile Modulus
                      M-102 Poisson’s Ratio and Tensile Modulus (2-3 Direction)
                      M-130 Tensile Strength with Plots
                      M-204 Tensile Stress-Strain, Strength, and Modulus
                      M-204HT High Temperature Tensile Stress Strain for Metals
                      M-204V True Stress Strain Measurements Using 3D DIC
                      M-205 Tensile Properties of Elastomers
                      M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
                      M-209 Combined Loading Compression (CLC)
                      M-210 Compressive Stress-Strain, Strength and Modulus
                      M-211 Lubricated Compressive Stress-Strain (Biaxial Tension)
                      M-212 Compressive Properties of Elastomers
                      M-213 Confined Compression Stress-Strain (Hydrostatic, for rubbers)
                      M-214 Volumetric Stress Strain Curves
                      M-215 Compressive Properties of Foam with Unloading
                      M-218 Equibiaxial Tension of Elastomers
                      M-219 Shear Stress-Strain
                      M-220 Planar Tension (Shear)
                      M-221 3 Point Flexural Stress-Strain, Strength and Modulus
                      M-225 4 Point Flexural Stress-Strain, Strength and Modulus
                      M-230 High Speed 3 Point Flexural Stress-Strain
                      M-231 High Speed Compressibility of Foams and Elastomers
                      M-232 High Speed Tensile Stress-Strain
                      M-233 High Speed Compressive Stress-Strain
                      M-235 Very High Speed Tensile Stress-Strain
                      M-242 Biaxial Force and Surface Strain by Punch Test
                      M-245 Forming Limit Diagram (FLD)
                      M-250 Tensile Creep
                      M-250H Tensile Creep With Humidity
                      M-250HT High Temperature Tensile Creep of Metallic Materials
                      M-251 Compressive Creep
                      M-252 Flexural Creep
                      M-254 Creep Rupture
                      M-260 Compression Set of Rubbers (Constant Deflection)
                      M-266 Long Term Instrumented Stress Relaxation
                      M-410 Dynatup Instrumented Impact
                      M-412 Falling Dart Uninstrumented Impact
                      M-425 Izod Pendulum Impact
                      M-427 Charpy Pendulum Impact
                      M-502 Flexural Fatigue
                      M-504 Flexural Fatigue S-N Curves
                      M-508 Tensile Fatigue S-N Curve
                      M-508M Tensile Fatigue S-N Curve of Metals (up to 60 Hz)
                      M-509 3 pt. Flexural Fatigue S-N Curve
                      M-512 Tensile Fatigue
                      M-512M Tensile Fatigue of Metals (up to 60 Hz)
                      M-513M Strain Controlled Fatigue of Metallic Materials (Up to 2 Hz)
                      M-515M Strain Controlled Tensile Fatigue E-N curves for Metals (Up to 2 Hz)
                      M-600 DMA - Tensile/Compressive ( 0.1-100 Hz)
                      M-600t DMA- Tensile/Compressive Mastercurve
                      M-601 DMA - Torsional (5 Temperatures, 0.1-500/s)
                      M-602 DMA - Flexural (0.1-100 Hz)
                      M-603 Shear Modulus vs. Temperature by DMA
                      M-604 Flexural Modulus vs. Temperature by DMA
                      M-605 Tensile Modulus vs. Temperature by DMA
                      M-606 Compressive Modulus vs. Temperature by DMA
                      M-610 Stress Relaxation/ Creep Compliance by DMA
                      M-611 Stress Relaxation/Creep Compliance by Time Sweeps
                      M-615 Creep-Relaxation by DMA-tensile, compressive or flex
                      M-620 Dynamic Hysteresis Loop
                      M-621 Cyclic Mullins Effect
                      M-622 Cyclic Hardening Stress-Strain
                      M-623 Cyclic Damage of Plastics
                      M-624 Stepwise Tensile Stress Relaxation
                      M-625 Stepwise Compressive Stress Relaxation
                      P-110 Heat Aging
                      P-210 Test Specimen Photo Documentation
                      Q-123 Extrusion Blow Molding Processability
                      Q-305 WSS-M99D68-A1
                      R-011 Capillary Rheology (1 Temperature)
                      R-012 Capillary Rheology with Bagley Correction (1 Temperature)
                      R-013 Very High Shear Capillary Rheology (1 Temperature)
                      R-014 Cogswell Extensional Viscosity
                      R-015 Thermal Flow Stability
                      R-016 Mooney Slip
                      R-017 Binding Extensional Viscosity
                      R-018 No-Flow Temperature
                      R-019 Rheotens Melt Elasticity
                      R-020 DMA Cone and Plate Dynamic Rheology (1 Temperature)
                      R-021 DMA Cone and Plate Steady Shear Rheology (1 Temperature)
                      R-022 DMA Parallel Plate Dynamic Rheology (3 Temperatures)
                      R-023 First Normal Stress Difference by DMA (1 Temperature)
                      R-024 Characteristic Relaxation Time by DMA (5 Temperatures)
                      R-025 Thermal Stability by Cone and Plate DMA
                      R-026 Transition Temperature by DMA
                      R-027 Cure Kinetics by DMA-isothermal
                      R-028 Cure Kinetics by DMA -non isothermal
                      R-030 Die Swell Measurements by Laser Micrometry
                      R-032 Static Die Swell/Sag by Laser Micrometry
                      R-035 Slit-Die Rheology (1 Temperature, 1 Die)
                      R-040 Equibiaxial Elongational Viscosity (1 Temperature, 1 Strain Rates)
                      R-042 Peldom Elongational Viscosity
                      SC-101 FTIR Analysis
                      SC-102 FTIR with EDS
                      SC-103 Pyrolysis Mass-Spec Analysis
                      SC-104 FTIR (micro) with EDS
                      SC-105 Ash Content by Muffle Furnace
                      SC-107 Flammability
                      SC-201 Molecular Weight by GPC
                      SC-210 Fogging Test
                      SC-211 Thermal Oxidative Stability
                      SH-100 Western Europe Small Sample PickUp- 2 kg Limit
                      SH-200 Western Europe Large Sample PickUp- 25 kg Limit
                      SM-065 Rockwell Hardness
                      SM-067 Durometer Hardness
                      SM-210 Optical Haze / Optical Transmission
                      SM-210 Optical Haze / Optical Transmission
                      SO-200 Matereality Personal Material DatabasePro
                      SO-201 Matereality Workgroup Annual Subscription-5
                      SO-202 Matereality Workgroup DatabasePro
                      SO-202 Matereality Workgroup DatabasePro
                      SO-220 Matereality Material Supplier Database
                      SO-245 Matereality Scaled Material Data Server
                      SO-280 Matereality ANSYS DatabaseLite Upgrade
                      SP-101 Specimen Molding Services
                      SP-105 Specimen Machining Services
                      SR-010 Melt Flow Rate
                      SR-011 Relative Viscosity
                      SR-095 Brookfield Viscosity
                      ST-308 Mold Shrinkage
                      T-010 DSC Scan
                      T-012 Transition and Eject Temperature
                      T-015 Specific Heat
                      T-020 Heat Deflection Temperature
                      T-021 Vicat Softening Temperature
                      T-101 Thermal Conductivity (Melt)
                      T-102 Thermal Conductivity (Solid)
                      T-103 Thermal Conductivity Scan
                      T-107 Thermal Conductivity by Guarded Heat Flow Meter (Single Point)
                      T-108 Thermal Conductivity by Guarded Heat Flow Meter (Scan)
                      T-110 Thermal Conductivity of Films by Guarded Heat Flow Meter
                      T-150 Heat Transfer Coefficient
                      T-201 Carbon Black Content by TGA
                      T-203 Thermogravimetric Analysis (TGA)
                      T-302 Thermal Expansion Coefficient by TMA (Anisotropic)
                      T-303 Thermal Expansion Coefficient by TMA
                      T-310 Thermal Diffusivity by Holometrix (Scan)
                      T-311 Thermal Diffusivity by Holometrix (Single Point)
                      U-060 Universal TestPak-Injection Molding of Isotropic Materials
                      U-061 Universal TestPak-Injection Molding of Anisotropic Materials
                      U-063 Moldflow CRIMS Shrinkage Option
                      U-064 SIGMASOFT Shrinkage Option
                      U-065 Juncture Loss Option for Moldflow
                      V-101 Falling Dart Impact Validation for LS-DYNA Crash Material Model
                      V-102 Falling Dart Impact Validation for Abaqus Crash Models
                      V-150 Ribbed Plaque Flexural Validation for Abaqus *Elastic *Plastic Model
                      V-151 Ribbed Plaque Flexural Validation for Elastic Plastic Model
                      V-160 Compressive Validation for ANSYS Hyperelastic Model
                      V-170 Torsional Crank Validation of Additive Material Models in ANSYS
                      V-171 Torsional Crank Validation of Additive Material Models in Abaqus
                      V-172 Torsional Crank Validation of Additive Material Models in RADIOSS
                      Z-996 Data Unit Conversion
                      Z-998 Data Analysis
                      Z-999 Custom Test
                      livechat button

                              
                              

                                          aviation

                                          Second-hand housing

                                          the weather

                                          Go abroad

                                          game

                                          game

                                          Foreign exchange

                                          game

                                          image